Author Topic: WT rebuild kits with metering lever springs.  (Read 733 times)

0 Members and 1 Guest are viewing this topic.

Offline Bearcat

  • Club Member
  • *****
  • Posts: 358
  • takeoff optional landing mandatory
WT rebuild kits with metering lever springs.
« on: January 22, 2018, 04:54:54 pm »
Amazon sells k10-WAT and k20-WAT rebuild kits for most under 40 cc gas engines that include the metering springs.  The Kits have never had the springs before and if you didn't have a salvage carb when you lost one you were in a world of hurt.  the kits are manufactured  by HIPA and all the photos of other kits also appear to have the springs included as well as new filter screens.  I always seem to have a problem losing the things and so good to see someone is taking pity on me and including the springs in the kits.
K10-WAT kits only contain the gaskets and metering spring and needle while the K20-WAT kits have parts for full rebuild including internal screens and plugs.
« Last Edit: January 22, 2018, 04:57:31 pm by Bearcat »
Max Ficken

Offline Mark Fuess

  • Administrator
  • *****
  • Posts: 38
Re: WT rebuild kits with metering lever springs.
« Reply #1 on: July 18, 2018, 12:14:57 pm »
For what it's worth, you can get K20-WAT kits at Mr.C's hardware.