Author Topic: wanted land gear for ultra hots  (Read 886 times)

0 Members and 1 Guest are viewing this topic.

Offline Bearcat

  • Club Member
  • *****
  • Posts: 359
  • takeoff optional landing mandatory
wanted land gear for ultra hots
« on: October 11, 2017, 02:43:28 pm »
i am building a ultra hots and checked the gear i had that i thought was the was my old set.  Wrong!

need aluminum 18.5 inch inside wheel spacing and 5 inch wide fuse and height of 6.5 to 7 inches.  If you that size gear that you would be willing to part with call me at 8176919630.  Max  triplane41@att.net
Max Ficken

Offline Joystick

  • Club Member
  • *****
  • Posts: 1839
  • GSWAM Forum Member
Re: wanted land gear for ultra hots
« Reply #1 on: October 11, 2017, 08:59:03 pm »
Sounds like the same size I'm using for my biplane. I don't have any to spare, but Tower Hobbies sells them.
CHECK SIX

Signed: Steve Rogers (As far as you know)

Nothing is foolproof to a sufficiently talented fool. For Herb: All facts have not been personally verified by me for accuracy. Use them at your own risk.

Offline Joystick

  • Club Member
  • *****
  • Posts: 1839
  • GSWAM Forum Member
Re: wanted land gear for ultra hots
« Reply #2 on: October 12, 2017, 07:46:33 pm »
Great Planes Main Landing Gear from a Giant Big Stik ARF, Tower Hobbies #LXKJY4

Works great on my 30cc planes.
CHECK SIX

Signed: Steve Rogers (As far as you know)

Nothing is foolproof to a sufficiently talented fool. For Herb: All facts have not been personally verified by me for accuracy. Use them at your own risk.